Gemstone Guide

By Bradney W. SimonMore from this author

Updated on October 15, 2016

This page contains a gemstone guide to common abrasives used near gemstones; their usage, hardness rate and effects compiled by Tom Weishaa CMBJ.

Abrasive

Silicon Carbide

• Usage - A common abrasive found in most mizzy wheels, cut-off discs and some aggressive rubber wheels. Silicon carbide usually appears as small silver flecks of metal.
• Hardness - 9.5
• Effect - Will damage all gemstones. Even diamond under some circumstances.

Aluminum Oxide

• Usage - Common abrasive found in many types of medium cut rubber wheels
• Hardness - 9
• Effect - Will abrade most gemstones

Corundum

• Usage - Common abrasive found in many types of medium cut rubber wheels.
• Hardness - 9
• Effect - Will abrade most gemstones

Ceramic

• Usage - This abrasive is becoming more popular as a fine cut. Often suspended in silicone wheels.
• Hardness - 7.5
• Effect - Will abrade many softer gemstones

Steel Tools

• Usage - Hardened steel tools; files, burs and burnishers are often wrongly used to shape prongs or bezels directly on gemstones.
• Hardness - 7.5
• Effect - This practice can harm all soft stones and can abrade facets junctions on gemstone harder than the steel.

Silicone

• Usage - Once used as a binder, silicone is now becoming popular as a fine-finishing wheel.
• Hardness - 7
• Effect - Will wear down some soft gemstones

Pumice

• Usage - Effective when used to remove tool marks from prongs in close proximity to gemstones.
• Hardness - 5
• Effect - Can be used directly on most gemstones

Click on image to enlarge:

By Bradney W, Simon – © Bench Magazine

In association with

BENCH Magazine is devoted to the Bench Jeweler in retail jewelry stores and small trade shops.