Aureus 3D Printer from EnvisionTec

Home Learning Center BlogsAureus 3D Printer from EnvisionTec

This article was originally posted on Userblogs on 5/26/2009.

By GanoksinMore from this author

By stevenadlerblogsMore from this author

Updated on November 20, 2023

CK 09 will mark the arrival of still another new system from EnvisionTec. This year the buzz is about the Aureus printer that will nearly double the capacity of the EnvisionTec desktop machine. According to company president Al Siblani, the new system boasts Intelligent peeling with different peeling and leveling speeds within same cycle as well as better gray scale control to increase depth of curing control on inner and outer contour to provide a better and smoother surface.

Along with the new machine technology, the Aureus will also have the advantage of two new resin materials. The new WIC500 with a higher wax content for investment casting and a new FOTO silver material that can be used directly with vulcanized gold label from Castaldo. There is no denying that EnvsionTec has been developing more new machines and materials than any other RP supplier. If you plan to attend JCK, stop by at the EnvisionTecJCK booth 60406 and take a look…… Wonder what will be next…? Ask Al about the EnvisionTec..Ultra…..

You assume all responsibility and risk for the use of the safety resources available on or through this web page. The International Gem Society LLC does not assume any liability for the materials, information and opinions provided on, or available through, this web page. No advice or information provided by this website shall create any warranty. Reliance on such advice, information or the content of this web page is solely at your own risk, including without limitation any safety guidelines, resources or precautions, or any other information related to safety that may be available on or through this web page. The International Gem Society LLC disclaims any liability for injury, death or damages resulting from the use thereof.